Product Overview; Controls; Ignition Switch; Choke Control - Toro 74784 Operator's Manual

Product Overview

1. Traction-control pedal
2. Height-of-cut lever
3. Smart Park ™ switch
4. Steering wheel
5. Control panel
6. Operator seat

Controls

Become familiar with all controls in
Figure 5 before you start the engine and operate the
machine.
Control Panel
1. Smart Park™ Switch
2. Throttle

3. Choke control

4. Ignition switch

Figure 4
7. Engine
8. Fuel-tank cap
9. Rear drive wheel
10. Key Choice ® control
11. Mower deck
12. Front caster wheels
Figure 4
Figure 5
5. Blade-control switch
(power takeoff)
6. Parking brake—On
7. Parking brake indicator
light
8. Parking brake—Off
1. Operating–in–Reverse
warning light
2. Key Choice key (blue in
color)
Ignition Switch
g027935 Use this switch to start the engine. It has 3 positions:
S , R
TART UN
Choke Control
Use the choke to start a cold engine. Pull the choke
knob up to engage it. Push the choke knob down to
disengage it

Throttle Control

The throttle controls the engine speed, and it has a
continuous-variable setting from the S
and
position (Figure
Blade-Control Switch (Power
Takeoff)
The blade-control switch (PTO) engages and
disengages power to the mower blades
Fuel-Presence Window
The fuel window, located on the left side of the
machine, can be used to verify the presence of fuel in
g028250
the tank (Figure
Height-of-Cut Lever
Use the height-of-cut lever to lower and raise the deck
from the seated position. Moving the lever up (toward
you) raises the deck from the ground and moving the
lever down (away from you) lowers the deck toward
the ground. Adjust the height-of-cut only while the
machine is not moving
11
Figure 6
3. Fuel-presence window
, and O .
FF
(Figure 5).
5).
6).
(Figure 19).
g028251
to F
LOW AST
(Figure 5).