UUNI 3 Essentials User Manual page 26

I can see flames at the rear of
my Uuni 3
Flames are appearing from my
Uuni 3's chimney
I have heard a 'pop' or 'bang'
sound from my Uuni 3's burner
24
Flames may escape from the rear of your Uuni 3 when the flow of convection is broken e.g. when the door
is taken off. This is perfectly normal: Ensure that you have read through the safety manual and that your
Uuni 3 is positioned at least 1.5m (5ft) away from any buildings or structures.
Caution: Never use your Uuni 3 in high winds.
Uuni 3's chimney draws flames from the heat source, through the oven and across the cooking area.
Flames from the chimney are a sign that your Uuni 3 is running hot. As always, exercise caution and ensure
that young children and animals are not left unattended when Uuni 3 is lit.
As is the norm when cooking with fire, airflow is key when it comes to Uuni 3. If too many pellets are
added at once, this can cause the fire to die down and quickly reignite when more air comes through the
grate. This can cause a 'pop' or 'bang'. To avoid this, follow the steps in the Burner quick start guide
(page 14) and ensure that your pellet level is maintained throughout your cook. Never add a full load of
pellets when lighting or topping up. If your pellets drop below the advised level, add small amounts of
pellets gradually and allow these to light fully before topping up.
As always, exercise caution when cooking with fire.
Cant find the answer you're looking for? Check out our online resources, FAQ or
contact us at support@uuni.net. We'll be happy to help!