UUNI 3 Essentials User Manual page 18

6
7
Never add a full load of pellets while lighting or topping up. Instead, add small
amounts of pellets gradually and allow these to light fully before topping up.
16
8
6. If lighting using a blow torch,
point the flame through the
hole on the side of your burner.
Hold it here for 30-45 seconds
or until your pellets are alight.
7. Once your starter pellets are
fully alight, add small amounts
of pellets gradually. Allow
these to light fully before
topping up to the level shown.
8. Maintain a pellet level to
approximately 3cm (1")
below the top of your hopper
throughout your cook. Use the
bolt on the hopper as a level
guide.