Related Manuals for ResMed Swift LT
Summary of Contents for ResMed Swift LT
-
Page 1: User Guide
Swift™ LT NASAL PILLOWS SYSTEM User Guide English... -
Page 2: Intended Use
NASAL PILLOWS SYSTEM Thank you for choosing the Swift LT. Intended Use The Swift LT channels airfl ow noninvasively to a patient from a positive airway pressure device such as a continuous positive airway pressure (CPAP) or bilevel system. The Swift LT is: •... - Page 3 Parts of the Swift LT & Ordering Information Plastic tube retainer 60586 Top buckle 60579 (1) 60580 (10) Back buckle 60558 (1) 60559 (10) Headgear assembly Frame 60578 60575 Pillows 60571 (S*) 60572 (M*) 60573 (L*) Elbow Short tube assembly 60577 Velcro™...
- Page 4 Rotate frame to adjust Connect the short tube The Swift LT is now fi tted pillow angle to ensure it to the fl ow generator’s air and ready for use. Head- sits comfortably.
- Page 5 Remove headgear from short tube. frame. Remove pillows from Remove elbow from frame. frame. Cleaning your Swift LT in the home Notes: • The nasal pillows system and headgear should be cleaned by handwashing. • The headgear may be washed without being disassembled.
- Page 6 If you do not have Internet access, please contact your ResMed representative. Storage Ensure that your Swift LT is thoroughly clean and dry before storing it for any length of time. Store the mask in a cool dry place out of direct sunlight. Disposal The Swift LT does not contain any hazardous substances and may be disposed of with your normal household refuse.
- Page 7 Reassembling your Swift LT Insert elbow into frame. Align pillows with frame. Push pillows fi rmly into frame. Ensure top and bottom retention tabs slot into place. Check positioning markers Slide left and right headgear stability arms onto frame. on pillows and headgear Ensure inner wall of pillows is in correct position.
-
Page 8: Troubleshooting
fl ow generator function. • Discontinue using the Swift LT if you have ANY adverse reaction to the use of the mask, and consult your physician or sleep therapist. - Page 9 Technical specifi cations Note: The mask system does not contain latex, PVC or DEHP materials. Pressure–Flow Note: The mask contains passive venting that meets the Curve requirements for protection against rebreathing as specifi ed in ISO 17510-2. As a result of manufacturing variations, the vent fl...
-
Page 10: Limited Warranty
90 days or in the case of disposable masks the maximum use period. This warranty is only available to the initial consumer. It is not transferable. If the product fails under conditions of normal use, ResMed will repair or replace, at its option, the defective product or any of its components. - Page 11 NZ 412500, NZ 412501, NZ 412502, NZ 412503, NZ 412504, NZ 412505, NZ 412506US D552731. Others designs pending. Swift, AutoSet CS and VPAP are trademarks of ResMed Ltd and are registered in U.S. Patent and Trademark Office. Velcro is a registered trademark of Velcro Industries B.V.
- Page 12 608299-Eng/1 09 12 SWIFT LT USER AMER Ml 6 0 8 2 9 9 Global leaders in sleep and respiratory medicine www.resmed.com...
Need help?
Do you have a question about the Swift LT and is the answer not in the manual?
Questions and answers