Texture/Glossing Of Housing; Tilt And Swivel Base; Label; Kensington Lock - Philips 274G5DSD/93 Service Manual

Meridian 5
84

Texture/Glossing of housing

The texture area and texture no should follow Philips make-up sheet.
The exterior surfaces shall have a uniform texture.
Philips must approve the mold texturing.
Detail document for texture refer to "UN-D249", "UN-D 600".
< = 20 gloss units
Tilt and swivel base ( Refer to Quick Specification table )

Label

Regulatory label / Carton label should follow Philips requirement.
China RoHS label
Detail document refer to Philips Engineering Reference Book.

Kensington Lock

Must meet Kensington_slot.spec "TYE-M0004".
MMD request metal plate in Kensington hole.

Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 )

Transportation

Transportation standards refer to UAN-D1534/00/01/02.
Transportation packages
Net weight Packaging and wrapping shall be sufficient to protect the product against damage
or loss during shipment from the supplier to the destination specified in the purchase order.
All packaging materials are subject to test and evaluation per UAN-D1534/00/01/02.
The cushion material shall be constructed using EPS material.
The doggy hole is requested.
Transportation Test
Overall tests refer to UAN-D1534/00/01/02
Vibration, drop test should be performed at ambient temperature (20°C to 23
humidity (40% to 65%).
A. Transportation test specification for all regions
Package test
1. Random Vibration test
2. Drop test
3. Cold Drop test (for design reference)
Un-package test
1. Half sine shock test (non operation)
B. Transportation test specification for China/India
Package test
1. Random Vibration test
.
o
C) and relative