Safe ® Select Switch Designation; High/Low Rate Switch (Dual Rates); Control Direction Test - PARKZONE Conscendo Advance Instruction Manual

SAFE ® Select Switch Designation
SAFE® Select technology can be easily assigned to any open switch (2 or 3
position) on your transmitter. With this new feature, you now have the fl exibility
to enable or disable the technology while in fl ight.
IMPORTANT: Before assigning your desired switch, ensure that the travel for
that channel is set at 100% in both directions.
Assigning a switch
1.
Bind the aircraft correctly to activate SAFE Select. This will allow the sys-
tem to be assigned to a switch.
2.
Hold both transmitter sticks to the inside bottom corners and toggle the
desired switch 5 times (1 toggle = full up and down) to assign that switch.
The control surfaces of the aircraft will move, indicating the switch has
been selected.
Repeat the process to assign a different switch if desired.
NOTICE: SAFE Select is assignable on any unused Channels 5–9.
Hi/Low Rate Switch (Dual Rates)
All DSM2/DSMX full range transmitters features dual rates to allow you
to select the amount of travel that you want from the control surfaces.

Control Direction Test

Restrain the aircraft so it does not escape your control while
you are testing your transmitter controls.
Move the sticks on the transmitter* to ensure the aircraft
responds as shown.
If your model does not respond as shown, DO NOT FLY! Refer to
the Troubleshooting Guide in this manual for more information.
If you need more assistance, contact the appropriate Horizon
Hobby Product Support department.
Mode 1 and 2 Transmitters
3 position Switch
Dual Rate High Rate
Aileron 100%
Elevator 100%
Rudder 100%
Transmitter
Command
2 position Switch
Low Rate
70%
70%
70%
Aircraft Reaction
EN
100%
x 5
100%
9