Service Of Power Components - PARKZONE Conscendo Advance Instruction Manual

Service of Power Components

CAUTION: Always disconnect the fl ight battery from the model before
removing the propeller.
Disassembly
1. Remove the 2 screws (A) and spinner-prop unit (B) from the motor.
2. Carefully remove the 4 screws (C) and cowling (D) from the fuselage.
3. Remove the 4 screws (E) and X-mount (F) with the motor from the fuselage.
4. Disconnect the motor connectors from the ESC connectors.
5. Remove the 4 screws (G) to separate the X-mount from the motor (H).
6. Assemble in reverse order.
Assembly Tips
• Correctly align and connect the motor wire colors with the ESC wires.
• Ensure that all screws are tight and secure.
Service and Repair
NOTICE: If you replace the receiver, install the new receiver in the same
orientation and manner as the original receiver or damage may result.
Thanks to the Z-Foam™ material in the wing and fuselage of this aircraft,
repairs to the foam can be made using virtually any adhesive (hot glue, regular
CA (cyanoacrylate adhesive), epoxy, etc).
E
D
C
B
A
A
EN
F
G
H
13