Lexus RC350 Owner's Manual page 520

520
7-2. Steps to take in an emergency
Starting the engine
Ensure that the shift lever is in P and depress the brake pedal.
1
Touch the Lexus emblem side of the
2
electronic key to the engine switch.
When the electronic key is detected, a
buzzer sounds and the engine switch
will turn to IGNITION ON mode.
When the smart access system with
push-button start is deactivated in cus-
tomization setting, the engine switch will
turn to ACCESSORY mode.
Firmly depress the brake pedal and check that
3
information display.
Press the engine switch.
4
In the event that the engine still cannot be started, contact your Lexus dealer.
Stopping the engine
■
Shift the shift lever to P and press the engine switch as you normally do when stopping
the engine.
Replacing the key battery
■
As the above procedure is a temporary measure, it is recommended that the electronic
key battery be replaced immediately when the battery is depleted. (P. 427)
Changing engine switch modes
■
Release the brake pedal and press the engine switch in step
The engine does not start and modes will be changed each time the switch is pressed.
(P. 208)
When the electronic key does not work properly
■
Make sure that the smart access system with push-button start has not been deacti-
●
vated in the customization setting. If it is off, turn the function on.
(Customizable features: P. 569)
Check if battery-saving mode is set. If it is set, cancel the function. (P. 158)
●
RC350_RC300 AWD_RC300_RC F_U(OM24748U)
is shown on the multi-
above.
3