Lexus RC350 Owner's Manual page 132

132
2. Instrument cluster
Odometer/trip meter display
Odometer
■
Displays the total distance the vehicle has been driven.
Trip meter A/trip meter B
■
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters A and B can be used to record and display different dis-
tances independently.
To reset, display the desired trip meter and press and hold the odometer/trip meter
and trip meter reset button.
Eco Driving Indicator
■
During Eco-friendly acceleration (Eco driving),
the Eco Driving Indicator Light will turn on.
When the acceleration exceeds the Zone of
Eco driving, or when the vehicle is stopped, the
light turns off.
Eco Driving Indicator will not operate under the following conditions:
The shift lever is in any position other than D.
●
A paddle shift switch is operated.
●
Neither normal mode nor Eco drive mode is selected. (P. 301)
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
●
Start-up display
■
When the engine is started, the name of the vehicle is displayed on the multi-information
display.
While the start-up display is being displayed, the meter display cannot be changed even
if the drive mode is changed. When the start-up display is finished, the meter display for
the currently selected mode will be displayed.
Torque distribution display (if equipped)
■
Torque distribution may not be displayed correctly in some cases, such as when the vehi-
cle passes over road expansion joints.
RC350_RC300 AWD_RC300_RC F_U(OM24748U)