Lexus RC350 Owner's Manual page 448

448
7-2. Steps to take in an emergency
Insert the towing eyelet into the hole
3
and tighten partially by hand.
Tighten down the towing eyelet
4
securely using a wheel nut wrench
or hard metal bar.
Securely attach cables or chains to the towing eyelet.
5
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
6
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
7
When the shift lever cannot be shifted: P. 219
While towing
■
If the engine is not running, the power assist for the brakes and steering will not function,
making steering and braking more difficult.
Wheel nut wrench
■
Wheel nut wrench is installed in trunk. (P. 490, 504)
RC350_RC300 AWD_RC300_RC F_U(OM24748U)