Erasing the entire HomeLink
Press and hold the 2 outside buttons for
10 seconds until the HomeLink
cator light changes from continuously
lit (orange) to rapidly flashing (green).
If you sell your vehicle, be sure to erase
the programs stored in the HomeLink
memory.
Codes stored in the HomeLink
■
The registered codes are not erased even if the battery cable is disconnected.
●
If learning failed when registering a different code to a HomeLink
●
has a code registered to it, the already registered code will not be erased.
Before programming
■
Install a new battery in the transmitter.
●
The battery side of the transmitter must be pointed away from the HomeLink
●
When support is necessary
■
Visit on the web at www.homelink.com/lexus or call 1-800-355-3515.
WARNING
When programming a garage door or other remote control device
■
The garage door or other device may operate, so ensure people and objects are out of
danger to prevent potential harm.
Conforming to federal safety standards
■
Do not use the HomeLink
device that lacks safety stop and reverse features as required by federal safety stan-
dards.
This includes any garage door that cannot detect an interfering object. A door or
device without these features increases the risk of death or serious injury.
When operating or programming HomeLink
■
Never allow a child to operate or play with the HomeLink
RC350_RC300 AWD_RC300_RC F_U(OM24748U)
5-4. Using the other interior features
®
memory (all three codes)
®
indi-
®
®
memory
®
compatible transceiver with any garage door opener or
®
®
button that already
.
®
buttons.
365
5