WARNING:
Please turn off the power and disconnect power source before
removing/installing batteries. Failure to comply may result in damage of the
device.
3.2 Charging Battery
WARNING:
Please fully charge the device before using for the first time.
4.
Device Operations
WARNING:
1.
Press and lift the back cover clip to
remove the back cover.
2.
Insert the battery at the direction
shown in the picture. Make sure the
gold fingers (electricity transmission
interface) are facing its corresponding
interface on the device.
3.
Gently press the battery towards the
device and press again to fit into the
housing.
4.
Insert the latch into their appropriate
receptacles and press firmly on the
back cover to close up the device.
1.
Simply insert mini USB cable into the
power input jack. Connect the other
end to a host device (notebook, mobile
phone, etc.)
2.
Power LED stays RED when battery
power is low, stays GREEN when
battery is under charging, flashes
GREEN light when fully charged.