Table of Contents
Advertisement
Manual
9
Packaging / returns
9.1
Complete devices
9.2
Electronic assemblies
B-eco
Not properly packaged components and devices can cause costs due to damages
during shipping.
Please observe the following information when sending products to Kaba.
Kaba GmbH is not liable for products that have been damaged due to negligent
packaging.
The original packaging has been specifically designed to fit the device. It offers
maximum protection against damage in transit.
Always use the original packaging for returning the products!
If this is not possible, packaging which ensures that the device is not damaged
during shipping and handling must be provided.
•
Use a robust and thick-walled transport box or cardboard box. Approximately
8 to 10 cm of space needs to be allowed on either side of the device.
•
Wrap the device with a suitable foil or put it into a bag.
•
Generously stuff foam pads or air cushions, for example, all around device.
Movements of the device inside the packaging must be excluded.
•
Use only dustless and environmentally friendly padding material.
ESD sensitive electronic assemblies such as printed circuit boards, readers, etc. must
be stored, transported, and shipped in appropriate ESD protective bags.
Electronic assemblies may only be packed at ESD secure workplaces and by persons
familiar with general ESD safety standards and who apply them on a regular basis.
Returning electronic assemblies in packaging with sufficient ESD protection is a
prerequisite for
•
the submission of warranty claims after functional failures of any type.
•
replacement of printed circuit boards and electronic components in
exchange.
Electronic components delivered in packaging without sufficient ESD protection are -
-in order to maintain a high quality standard-- neither analyzed nor repaired but
directly disposed of.
04043988 - 02/2014
Packaging / returns
65
Hide quick links:
Advertisement
Table of Contents
