Table of Contents
Advertisement
Grouped safety messages
2.4
Handling lithium batteries
2.5
ESD (electrostatic discharge) protective measures
10
The device has a lithium manganese dioxide battery, type CR2032, to buffer the
memory. The battery is on the rear of the terminal housing.
CAUTION
Lithium batteries can rupture or burst like an explosive.
Improper handling of lithium batteries can cause fire and explosions.
•
Lithium batteries may only be replaced by the SERVICE PERSON.
•
They may only be replaced by batteries of the same type.
•
Do not open, bore through, or crush lithium batteries.
•
Do not burn lithium batteries or expose them to high temperatures.
•
Do not short-circuit lithium batteries.
•
Do not recharge the lithium batteries.
NOTICE!
Danger for electronic components due to electrostatic discharge.
Improper handling of printed circuit boards or components can cause damages that
lead to complete failures or sporadic errors.
•
During installation and repair of the device, the ESD protective measures must
be considered.
The following rules must be considered:
•
Wear an ESD wristband when handling electronic components.
Connect the end of the wristband to a discharge socket or an unvarnished
grounded metal component. This way, static charges are discharged from
your body securely and effectively.
•
Touch only the edges of circuit boards. Do not touch the circuit board nor the
connector.
•
Place all dismantled components on an antistatic surface or in an antistatic
container.
•
Avoid contact between circuit boards and clothing. The wristband only
protects the printed circuit boards against electrostatic discharge from your
body, but there is still a risk of damage through electrostatic discharge from
your clothing.
•
Transport and dispatch dismantled modules only in electrostatically shielded
protective bags.
04043988 - 02/2014
Manual
B-eco
Hide quick links:
Advertisement
Table of Contents
