Start-up
6.4
Manual settings
46
Device settings can also be made manually. This might be required, for example, to
define a fixed network address or to configure later hardware extensions.
There are the following options to adapt the parameters:
•
Service mode
For the setting of the parameters via menu-controlled service functions per
HTTP browser, see BECO service module manual.
•
Remote setup
Modify the parameters via FTP (see BECO service module manual).
•
B-COMM
Modify the parameters via the "Terminal basis settings" menu item (see BECO
service module manual).
04043988 - 02/2014
Manual
B-eco