En Maintenance And Repair; 10.1 Maintenance - Ecom SHL 200-Ex Operating Instructions Manual

For fast processing, have the following information ready:
• Type and serial number
• Purchase information
• Error description
• Intended use (in particular input / output wiring)
9.6.1 LED voltage errors
red green green green green Description
Danger when used in hazardous areas!
The explosion protection is impaired!
• Open the portable lamp in safe areas only.
Troubleshooting
• Open the portable lamp (see chapter "Battery replacement").
• Disconnect and then reconnect battery.
• Close the portable lamp.
• Insert portable lamp into charging unit.
• Charge battery.
10 Maintenance and repair
Unauthorized work being performed on the device!
Risk of injuries and material damage!
• Work performed on the device must only be carried out by appropriately

10.1 Maintenance

Observe the relevant national regulations in the country of use.
• Consult the relevant national regulations to determine the type and extent of
inspections.
• Adapt inspection intervals to the operating conditions.
authorized and trained personnel.
LED input voltage too high
LED input voltage too low
WARNING
WARNING
Portable Lamp
SHL 200-Ex
Maintenance and repair
41
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN