EcoSmart EL40 Installation, Operation And Maintanance Manual

Electric series

Advertisement

INSTALLATION,
OPERATION
AND MAINTENANCE
MANUAL
ELECTRIC SERIES
EL40
44kg, 97lbs
EL100
88.75kg, 195.66lbs
pLease Read these instRuctions compLeteLy befoRe opeRating the ecosmaRt™ fiRe.
faiLuRe to foLLow them couLd cause a heateR maLfunction ResuLting in seRious
inJuRy and/oR pRopeRty damage.
wARNING: aLL eLectRic heateRs have hot and aRcing oR spaRking paRts inside. do not
use it in aReas wheRe gasoLine, paint oR fLammabLe Liquids aRe oR aRe stoRed.
this fiRepLace meets the constRuction and safety standaRds of h.u.d. foR
appLication in manufactuRed homes when instaLLed accoRding to these instRuctions.
INSTALLER: Leave this manuaL with the appLiance.
CONSUMER: Retain this manuaL foR futuRe RefeRence.
EL60
55.65kg, 122.69lbs
EL80
69.15kg, 152.34 lbs
EL120
98.95kg, 218.15lbs

Advertisement

Table of Contents
loading

Summary of Contents for EcoSmart EL40

  • Page 1 EL100 98.95kg, 218.15lbs 88.75kg, 195.66lbs pLease Read these instRuctions compLeteLy befoRe opeRating the ecosmaRt™ fiRe. faiLuRe to foLLow them couLd cause a heateR maLfunction ResuLting in seRious inJuRy and/oR pRopeRty damage. wARNING: aLL eLectRic heateRs have hot and aRcing oR spaRking paRts inside. do not use it in aReas wheRe gasoLine, paint oR fLammabLe Liquids aRe oR aRe stoRed.
  • Page 2: Important Instructions

    ENGLISH IMPORTANT INSTRUCTIONS wARNING: Improper installation, adjustment, alteration, service When using electrical heaters, basic precautions should always be or maintenance can cause injury or property damage. Refer to followed to reduce the risk of fire, electric shock and injury to this manual.
  • Page 3: Product Specifications

    1 x Fire Unit Glass Media 1 x Tethered Wall *The number of bags Control vary by model. 1 x Remote 3 x L Metal Nailing Flanges (with screws) © Copyright 2004 - 2017 EcoSmart Inc. All rights reserved. V02JN17...
  • Page 4: Installation

    ENGLISH INSTALLATION LOCATING FIREPLACE INSTALLING FIREPLACE CAUTION: Do not locate in a moist room such as a bathroom or wARNING: If the information in these instructions is not laundry room. followed exactly, a fire or explosion may result casing property damage, personal injury or death.
  • Page 5: Framing Dimensions

    To be performed by a qualified electrician according to local building codes. 3. Connect hard wire to the terminal block according to the diagram below. Choose any connector type according to local building code. Terminol Block © Copyright 2004 - 2017 EcoSmart Inc. All rights reserved. V02JN17...
  • Page 6: Optional Installations

    ENGLISH INSTALLATION OPTIONAL INSTALLATIONS Installing the wired Touch Control Indicator Lights 1. Locate and remove the access door on the rear right side of the When all indicator lights are off, touching any button will only show the fire unit. status.
  • Page 7: Operation

    2. Press to dim flame Finger pull tabs 3. Press to change flame from orange to blue 4. Press to brighten flame HEAT 2. Follow the instructions included with the optional log set. © Copyright 2004 - 2017 EcoSmart Inc. All rights reserved. V02JN17...
  • Page 8: Maintenance

    ENGLISH MAINTENANCE SERVICE PARTS ITEM PHOTO DESCRIPTION ESF.1.EL.P.PCB Electric Printed circuit board ESF.1.EL.P.LCD Electric LCD Touch Control ESF.1.EL.P.REM.IRC Electric Remote Control IR Receiver ESF.1.EL.P.TRA Electric Transformer ESF.1.EL.P.HF.RH Electric Right hand Heater Fan ESF.1.EL.P.HF.LH Electric Left hand Heater Fan ESF.1.EL.P.HTR Electric Heater ESF.1.EL.P.MTR Electric Spindle Motor ESF.1.EL.P.LED40...
  • Page 9: Frequently Asked Questions

    Q. Is there a remote receiver in the fireplace that requires batteries? A. No, only the remote transmitter requires batteries. The rest of the fireplace operates entirely off the main power supply © Copyright 2004 - 2017 EcoSmart Inc. All rights reserved. V02JN17...
  • Page 10: Troubleshooting

    ENGLISH MAINTENANCE TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION A. Disconnect unit from power source and A. Wiring is loose inspect for loose connections Flame is not visible when unit is turned on B. Motherboard is defective B. Replace motherboard A. Disconnect unit from power source and A.
  • Page 11: Cleaning And Maintenance Instructions

    • Dust can easily build up around the heater area under the appliance. Take particular care to clean this area on a regular basis to prevent buildup. wIRING DIAGRAM © Copyright 2004 - 2017 EcoSmart Inc. All rights reserved. V02JN17...
  • Page 12 EcoSmart Inc. 5875 Green Valley Circle, Suite 100 Culver City, CA 90230 P + 1 (888) 590.3335 E info@ecosmartfire.com V02JN17...

This manual is also suitable for:

El60El80El100El120

Table of Contents