Operation - EcoSmart EL40 Installation, Operation And Maintanance Manual

OPERATION

Remote
The On/Off button toggles the unit on or off. The Color button toggles
the flame image from orange to blue. The Dimmer button will lower
the brightness of the flame, the Bright button will make the fire image
brighter. Press the Heat down arrow to set the heat to low, press the
Heat up arrow to set the heat to high. Press either of these buttons
twice to turn the heat off.
1. Press to turn unit on / off
2. Press to dim flame
3. Press to change flame from
orange to blue
4. Press to brighten flame
1 3
2 4
HEAT
Installing Optional Log Set
1. Remove the inner glass panel by first removing the 2 screws in the
finger pull tabs (finger pull tabs are located on the top of the glass
panel.) Tilt the glass face down about 45 degrees and remove the
glass. Store the glass panel upright (not on it's face) in a safe place.
CAUTION: There are locator pins on the bottom of the glass panel.
Lift gently to avoid damaging the pins and unit face
Finger pull tabs
2. Follow the instructions included with the optional log set.
© Copyright 2004 - 2017 EcoSmart Inc. All rights reserved. V02JN17