Frequently Asked Questions - EcoSmart EL40 Installation, Operation And Maintanance Manual

MAINTENANCE
ITEM
ESF.1.EL.P.MDT40
ESF.1.EL.P.MDT60
ESF.1.EL.P.MDT80
ESF.1.EL.P.MDT100
ESF.1.EL.P.MDT120

FREQUENTLY ASKED QUESTIONS

Q. How do you program the remote control?
A. The remote comes pre-programmed. No programming is necessary.
Q. What distance can the remote be used from the fireplace?
A. Optimal distance for the remote control is within 20 feet (6 meters) of
the fireplace.
Q. Can you turn on the fireplace via the touch screen and off via the
remote (or vise versa)?
A. Yes.
Q. How long will the LED lights last?
A. LED Lamps have a life span of up to 20 years.
Q. Can the sensitivity of the touch screen be adjusted?
A. Yes, but only by the factory. Not just any technician will be able to
adjust the touch screen sensitivity.
Q. Can the fireplace be installed outside?
A. No. Please review the entire safety chapter before installing this
fireplace.
Q. Does the fireplace need to be on a dedicated 15 amp circuit?
A. Yes.
Q. What thickness of sheetrock should be used for the recessed
installation?
A. 1/2" (13mm) or 5/8" (16mm).
Q. How often do the batteries in the remote need to be replaced?
A. Annually, possibly more with heavy use.
Q. Is there a remote receiver in the fireplace that requires batteries?
A. No, only the remote transmitter requires batteries. The rest of the
fireplace operates entirely off the main power supply
PHOTO DESCRIPTION
Electric Metal Deco Trim 40
Electric Metal Deco Trim 60
Electric Metal Deco Trim 80
Electric Metal Deco Trim 100
Electric Metal Deco Trim 120
© Copyright 2004 - 2017 EcoSmart Inc. All rights reserved. V02JN17