TP-Link SR20 User Manual page 78

2 ) Click the Network icon.
3 ) Select Ethernet
left panel, then click Advanced.
4 ) Click TCP/IP.
5 ) From the Configure IPv4
6 ) Click OK.
• For Windows 7/8/8.1/10:
1 ) Right-click the Network icon on the system tray and select
Sharing Center
2 ) Right-click your network connection (wired or wireless) and select Properties.
3 ) Double-click Internet Protocol Version 4
4 ) Select both Obtain an IP address automatically
automatically, then click OK.
5 ) Click OK again to save your configuration.
• For Windows XP:
1 ) R ight-click the Network icon on the system tray and select
Connections.
2 ) Right-click your network connection (wired or wireless) and select Properties.
3 ) Double-click Internet Protocol
4 ) Select both Obtain an IP address automatically
automatically, then click OK.
5 ) Click OK again to save your configuration.
Visit www.tp-link.com/support
(for wired connection) or
drop-down list, select
> Change adapter settings.
(TCP/IP).
for technical support and troubleshooting information.
Wi-Fi (for wireless connection) in the
Using DHCP.
Open Network and
(TCP/IPv4).
and Obtain DNS server address
and Obtain DNS server address
Open Network
79