TP-Link SR20 User Manual page 39

Chapter 4
Insert your USB storage device into the router's USB port directly or using a USB
cable.
Tips:
• If you use USB hubs, make sure no more than 4 devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been
connected.
• If you use a USB hard drive, make sure its file system is FAT32, exFat, NTFS or HFS+.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Select
Advanced > USB Settings
2. Enable Authentication for Data Security
It is strongly recommended that you set and apply a sharing account for data
security.
1 ) Visit http://tplinkwifi.net, then log in with your Kasa account.
2 ) Select Advanced
3 ) Choose Use default Account
4 ) Enable Authentication
• If you leave
folders.
• If Share All is disabled, enable
> Device Settings and click
> USB Settings
(admin) or
to apply the sharing account.
Share All enabled, click the button to enable
Authentication
Advanced Functions on Web Management Page
.
> Sharing Access.
Use New Account
for specific folders.
and click SAVE.
Authentication for all
40