• Make sure door lock operates and door open/close properly.
Channel Replacement
1. Remove the following parts.
A. Door trim
B. Window glass
C. Door module
2. After loosening the mounting nuts, remove the door channel (A).
3. Installation is the reverse of removal.
• Make sure the door opens properly and locks securely.
Adjustment
Glass Adjustment
• Check the glass run channel for damage or deterioration, and replace them as needed.
1. Remove the following parts:
A. Quadrant inner cover.
B. Door trim.
2. Carefully move the glass (A) until the glass mounting bolts are visible, then loosen them.