3. Disconnect the connectors (A), and remove the seat assembly.
Be sure to perform PODS re-zero with Hi-Scan (pro) after replacing parts (passenger's) (Refer to page RT-
Airbag)
SEAT MOUNTING BOLT INSTALLATION PROCEDURE (manual seat only)
• Set the into the most rearward position. check then each slide is locked, and then tighten the front mounting
bolt temporarily.
• Set the seat into most forward position. check that each slide is locked, and then tighten the rear mounting
bolt completely.
• Set the seat into the most rearward position. check the front mounting bolt completely.
• Check that the seat operates to and fro smoothy and the locking portion locks properly.
Recliner Cover Replacement
1. Remove the recliner lever (A).
2. Remove the height lever (B).