1. Rear bumper assembly
Body (Interior and Exterior) > Bumper > Rear Bumper > Repair procedures
Replacement
• After remove the rear combination lamp.
• When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the
related parts your hands.
• Put on gloves to protect your hands.
• Take care not bend or scratch the cover and other parts.
1. Remove the transverse trim.
2. Luggage side trim.
3. Remove the mounting screw.
4. Remove the mounting bolts.
5. Disconnect the connector (A).
2. Rear bumper mounting bracket