Table of Contents
Advertisement
7. Apply a light coat of glass primer to the outside of the fasteners.
• Never touch the primed surface with your hand. If you do, the adhesive may not bond to the glass properly,
causing a leak after the windshield glass is installed.
• Do not apply body primer to the glass.
• Keep water, dust, and abrasive materials away from the primer.
8. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking
gun, and run a bead of adhesive (A) around the edge of the windshield (B) between the fastener and molding as
shown. Apply the adhesive within 30 minutes after applying the glass primer. Make a slightly thicker bead at each
corner.
Hide quick links:
Advertisement
Table of Contents
