Hyundai 2010 GENESIS COUPE Manual page 29

• When removing and installing the hood, an assistant is necessary.
• Be careful not to damage the hood and body.
• When removing the clips, use a clip remover.
1. Using a screwdriver, lift up slightly the socket clips (A) of both ends on the lifter (B), and then remove the lifter from
the bracket (C).
2. After loosening the hood hinge mounting bolts, remove the hood (A).
3. Installation is the reverse of removal.
• Make sure the hood opens properly and locks securely.
• Adjust the hood alignment.
Hood Lift Replacement
1. Using a screwdriver (A), lift up slightly the socket clips (B) of both ends on the lifter (D), and then remove the lifter
from the bracket (C).