Keep The Following Items By The Machine; Bottle Templates–Preparing To Run Customer’s Bottle; Entering Text Into Core Idraw Bottle Job File; Importing Logos - Universal Laser Systems VLS3.50 Operation Manual

3) Keep the following items by the machine...

a) Focus Tool
b) Service Manual (on disk)
c) Laser Operations Manual (on disk)
d) Lens cleaning solution and cotton swabs
e) Lens cleaning paper
f) Water bottle & Towel
g) Can of compressed air for cleaning optics
h) Other Items you need
i) Fire Extinguisher – know the location of the nearest fire extinguisher.
ii) Power Strip
iii) 50 Ft. Extension Cord
iv) 9-volt battery
v) Padded Moving Blankets
vi) Dental Mirror (optional)
vii) Phillips screw driver
viii) Allen wrenches (come with laser machine)
4) Bottle Templates – Preparing to Run Customer's Bottle
a) See step-by-step instructions.
b) Entering Text into CorelDraw Bottle Job File
(See screens on next page.)
i) Select CorelDraw file that matches bottle and acrylic Template.
ii) Type text in the text box. If the text box dashed line changes to a red outline your text
is too big – reduce the point size of the text until the red outline goes away.
iii) To change font style, highlight text and select the desired font.
iv) Templates allow running more than one bottle at a time in one job.
v) When you print from Corel, select the text you are engraving and print Selection (on
Print screen, click the Selection button). If you do not click Selection you may print
multiple pages for front and back of bottle.
c) Importing Logos
i) Import logo into text box.
ii) Adjust size of logo and allow it to "snap" to center of text box.
iii) Engraved results depend on logo quality. Vector graphics (.eps files) are best. Fuzzy
or heavily pixilated graphics will engrave poorly. If logo does not engrave well, it
may need to be edited manually to remove gray scale "noise" or hidden vector lines.
RNDC Checklist
02-08-2016