Table of Contents
Advertisement
10) Terminology
a) Lens Carriage – Moves left to right
b) Lens Plate, #3 Mirror and Focus Lens - red lens plate marked "1.5, 2.0 or HPDFO" is
held in with two thumbscrews. Lens plate holds the #3 mirror (item 1 below) and focus
lens (item 2 below)...
c) #2 Mirror- at left side of arm
d) #1 Mirror – you cannot see this mirror and do not need to clean it. It is built into the
CO2 laser inside the rear cover of the machine. The #1 Mirror is not accessible.
e) Beam Window –located inside machine at back left corner
RNDC Checklist
02-08-2016
Hide quick links:
Advertisement
Table of Contents
