Factory Reset - LG TCW2013LS2 Owner's Manual

64
PROGRAMMING MODE - TEST MODE

2. Factory reset -

After factory reset, machine information is changed to the default value.
Enter setup mode.
You will see LqC1
NOTE
• Washing time
• Rinse cycle
• Top spin speed
• Add SUPER WASH
NOTE
• Price setting varies by country
• Set your country from
• After EEPT, reset your country (Default country is USA)
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm button until
display.
Press the Start button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• All types – Push the Hot button twice.
9 minutes
twice
980 RPM
3 minutes extra wash and one extra rinse
mode (Refer How to enter the
Button
appears in the
Display
appears
)