LG TCW2013LS2 Owner's Manual page 43

12-1. Pause function setup
Enter setup mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display
Press the Start button.
Press Warm or Cold button and then select
Press the Start button.
The machine sets up the pause function, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
.
or
.
Disable
Enable
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button three times.
PROGRAMMING MODE - SETUP MODE
Button Display
appears
appears
One or the other will
display.
43