Table of Contents
Advertisement
2. Factory reset -
After factory reset, machine information is changed to the default value.
Entering setup
mode.
You will see LqC1
NOTE
• Washing time
• Rinse cycle
• Top spin speed
• Add SUPER WASH
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm button until
display.
Press the Start button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Hot button twice.
10 minutes
twice
1000 rpm
3 minutes extra wash and one extra rinse
PROGRAMMING MODE - TEST MODE
PROGRAMMING MODE - TEST MODE
Button
appears in the
Display
appears
61
61
Advertisement
Table of Contents
