Configuration Of Instrument Operating Parameters - Aethlabs microAeth AE51 Operating Manual

5. Connect the USB cable to the microAeth and
your computer.
6. After the microAeth establishes communication
with the microAethCOM software, the
connection status in the bottom left corner of
the main screen will change to Connected and
the microAeth serial number, status, and settings
will be displayed.
7. If the serial number, status, and settings are not
displayed, disconnect the USB cable from the
computer and reinsert it.
16 microAeth Model AE51 Operating Manual
®
8. To shut down the microAeth through the
microAethCOM software, click Options then
Shut down microAeth. Depending on the current
settings of the microAeth, the power button on
the front of the instrument can be used to shut
down the instrument.
2.6.2 Configuration of Instrument
Operating Parameters
IMPORTANT NOTE:
• The microAeth will not collect data with new
saved settings until it has been restarted.
All instrument parameters are configured through
the microAethCOM user interface. The various
parameters are accessed through Settings in the
Options menu on the tool bar.
1. Turn on the microAeth.
2. Start the microAethCOM software.
3. Connect the USB cable to the microAeth and the
computer. Wait until the microAeth establishes
communication with microAethCOM.
AethLabs
4. Click Options then Settings
5. On the Settings screen, the microAeth can be
configured.
AethLabs
6. When all settings are selected as desired, click
the Save settings button.
7. Once the settings have been saved, you will
be prompted to shut down the microAeth. The
microAeth will not collect data with the new
saved settings until it has been restarted.
microAeth Model AE51 Operating Manual
®
17