Bluetooth Settings; Security Settings; Navigation Settings - Kenwood DDX795 Instruction Manual

Settings Settings
<Open Source Licenses>
Show the Open Source Licenses.
<Initialize>
Initialize all settings made on the unit. A confirmation
message appears. Touch [Yes].
• The settings memorized on the <Audio SETUP
Memory> are not initialized.

Bluetooth settings

Display the <Bluetooth> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
<Bluetooth>
• ON (Initial): Activates the Bluetooth function of the
unit.
• OFF: Deactivates the Bluetooth function of the unit.
<Select Device>
Connect or disconnect the paired device. (Page 41)
<Device Name>
Display/change the device name to be shown on the
Bluetooth device. (Page 42)
<PIN Code>
Change the PIN code of the unit. (Page 42)
<Device Address>
Display the device address of the unit.
<TEL SETUP>
Configure the setting for using a Bluetooth mobile
phone. (Page 46)

Security settings

(Only for DDX6018BT/DMX6018BT/DDX5018BT/
DDX595/DDX575BT/DDX718WBTL/DMX718WBTL)
Display the <Security> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Security].
<SI>
(Only for DDX5018BT/DDX595/DDX575BT)
Activate or deactivate the security function.
(Page 8)
<Security Code Set>
(Only for DDX6018BT/DMX6018BT/DDX5018BT/
DDX718WBTL/DMX718WBTL)
Register the security code for the unit. (Page 7)
<Security Code Cancellation>
(Only for DDX6018BT/DMX6018BT/DDX5018BT/
DDX718WBTL/DMX718WBTL)
Clear the security code. (Page 7)
<Security Code Change>
(Only for DDX6018BT/DMX6018BT/DDX5018BT/
DDX718WBTL/DMX718WBTL)
Change the security code. (Page 7)

Navigation settings

(Only for DDX6018BT/DMX6018BT/DDX5018BT/
DDX718WBTL/DMX718WBTL)
Display the <Navigation> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Navigation].
<NAV Voice Volume>
Adjust the volume of the navigation guidance. (0 to
40, Initial: 24)
ENGLISH 55