Bluetooth Settings - Kenwood DDX793 Instruction Manual

BLUETOOTH BLUETOOTH
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
1
Display the <Bluetooth Setup> screen.
On the Home screen:
• You can also display the <Bluetooth Setup>
screen by pressing [ ] on the phone control
screen. (Page 47)
44
2
Change the PIN code.
• If you wish to skip changing the PIN code, go
to step 3.
• The PIN code is initially set to "0000".
• The maximum number of digits in the PIN
code is 15.
• Press [Clear] to delete the last entry.
3
Search for the unit ("DDX****" ) from your
Bluetooth device.
4
Select the unit ("DDX****" ) on your
Bluetooth device.
• If a PIN code is required, enter "0000" (initial).
When pairing is complete, the device is listed on
the <Paired Device List>.
• To use the paired device, connect the device
on the <Paired Device List>. (Page 45)