Bluetooth Settings; Security Settings; Navigation Settings - Kenwood DDX7018BT Instruction Manual

Settings Settings

Bluetooth settings

Display the <Bluetooth> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
<Bluetooth>
• ON (Initial): Activates the Bluetooth function of the
unit.
• OFF: Deactivates the Bluetooth function of the unit.
<Select Device>
Connect or disconnect the paired device. (Page 28)
<Device Name>
Display/change the device name to be shown on the
Bluetooth device. (Page 29)
<PIN Code>
Change the PIN code of the unit. (Page 28)
<Device Address>
Display the device address of the unit.
<TEL SETUP>
Configure the setting for using a Bluetooth mobile
phone. (Page 32)
42 ENGLISH
<MIC SETUP>
(Only for DDX7018BT/DMX7018BT Southeast Asian
models/DMX7018BT Indonesian models)
Select the microphone to use for Bluetooth mobile
phone.
• Built-in Mic (Initial): Select this when using built-in
microphone.
• External Mic: Select this when using the external
microphone connected to the MIC terminal.

Security settings

Display the <Security> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Security].
<Security Code Set>
Register the security code for the unit. (Page 6)
<Security Code Cancellation>
Clear the security code. (Page 7)
<Security Code Change>
Change the security code. (Page 7)

Navigation settings

Display the <Navigation> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Navigation].
<NAV Voice Volume>
Adjust the volume of the navigation guidance. (0 to
40, Initial: 24)