Kenwood DDX795 Instruction Manual page 49

Settings Settings
<Speaker/X'over>
Setting the speakers and crossover
frequency
1
Select a car type ( 1 ), select a speaker
( 2 ) (front speakers, rear speakers, or
subwoofer) to set, then location and
speaker/tweeter size ( 3 ) of the selected
speaker.
A selection window appears for each setting. Select
an item, then touch [Close] to close the window.
Speaker Select
Car Type
Comfort
Speaker
4 inch
Location
Door
Tweeter
X'over
Medium
• Repeat steps 2 and 3 to set all speakers.
• Adjustable items vary depending on the selected
speaker type.
• When a speaker is not connected, select [None].
• When setting the front speakers, also select the
speaker size for <Tweeter>.
2
Touch [X'over] to display the <X'over>
screen.
3
Select the speaker type ( 1
the crossover frequency ( 2
selected speaker.
X'over
Front Rear Subwoofer
HPF FREQ
100 Hz
Slope
-6 dB/Oct
Gain
0 dB
TW Gain
-1 dB
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Gain>
Adjusts the output volume of the selected speaker.
<TW Gain>
Adjusts the output volume of the tweeter.
<Phase Inversion>
Selects the phase for the speaker.
<Equalizer>
), then adjust
) of the
The following adjustments are memorized for each
source until you adjust the sound again. If the source
is a disc, the adjustments are stored for each of the
following categories.
• DVD/VCD
• CD
• Audio/video files (Page 66)
You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1
Display the preset sound modes.
2
Select a preset sound mode.
• Pops/Easy/Top40/Jazz/Powerful/Rock/Flat
(Initial)/iPod/User1/User2/User3/User4
Graphic Equalizer
Pops
Flat
To hide the preset sound modes: Touch [
iPod
ALL SRC
Easy Top40 Jazz Powerful Rock
iPod User1 User2 User3 User4
ENGLISH
].
47