Introduction To This Manual; What This Chapter Contains; Intended Audience; Compatibility - ABB ESI-S Installation, Operation And Maintenance Instructions

—

1 Introduction to this manual

1.1

What this chapter contains

This chapter gives basic information on this manual.
1.2

Intended audience

This manual is intended for all people that are involved in integrating, installing,
operating and/or maintaining the ESI-S inverter single phase range products. People
involved in the integration, installation and maintenance of the equipment are expected
to know the standard electrical wiring practices, electronic components and electrical
schematic symbols. End users should focus on the Operating instructions (Cf.
9) and Maintenance instructions (Cf.
1.3

Compatibility

The manual is compatible with all inverters of the ESI range with ESI-Manager software
the following versions or higher.
- V1 : V26 r3001
- V2 : V11 r23
The ratings in the present manual are given in kVA based on a 400V network and are
given also in Amps. The current ratings are not changing with the network voltage.
1.4

Configuration of the Energy Storage System

The ESI has been designed to work together with a master controller that is managing
the complete system. The master controller is taking care of the communication to the
Battery Management System, to the ESI and to the user. The Battery Management
System (BMS) is the device ensuring that the battery is used in such a way that the
battery is not damaged.
If a direct communication to the BMS is required, please contact your ABB service
provider.
Chapter 10) of this manual.
- V3 : V2 r0
- V4 : V0.1 r8
Manual Energy Storage Inverter ESI-S ç Introduction 5
Chapter