Safety-Technical Controls; Malfunctions; Warranty - Tens Twin Stim Plus Instruction Manual

3. Do not submerge the device in liquids or expose it to large amounts
of water.
4. Return the device to the carrying box with sponge foam to ensure
that the unit is well-protected before transportation.
5. If the device is not to be used for a long period of time, remove the
batteries from the battery compartment (acid may leak from used
batteries and damage the device). Put the device and
accessories in carrying box and keep it in cool dry place.
6. The packed TENS/ EMS device should be stored and transported
under the temperature range of -20°C ~ + 60°C, relative humidity
20%~ 95%, atmosphere pressure 500 hPa~ 1060 hPa.
Chapter 23: SAFETY-TECHNICAL CONTROLS
For safety reasons, review the following checklist before using
your Twin Stim
1.Check the device for external damage.
- deformation of the housing.
- damaged or defective output sockets.
2.Check the device for defective operating elements.
- legibility of inscriptions and labels.
- make sure the inscriptions and labels are not distorted.
3.Check the usability of accessories.
- patient cable undamaged.
- electrodes undamaged.
- Battery is not corroded
Please consult your distributor if there are any problems with device
and accessories.
Should any malfunctions occur while using the Twin Stim
Digital TENS/EMS, check
PDF created with FinePrint pdfFactory trial version
®
Plus Digital TENS/EMS
Chapter 24 : MALFUNCTIONS
32
http://www.pdffactory.com
- whether the parameters are set to the appropriate form of therapy.
Adjust the control correctly.
- whether the cable is correctly connected to the device. The cables
should be inserted completely into the sockets.
- whether the LCD reveals the menu. If necessary, insert a new
battery.
- for possible damage to the cable. Change the cable if any damage
is detected.
* If there is any other problem, please return the device to your
distributor. Do not try to repair a defective device.
Chapter 25: CONFORMITY TO SAFETY
®
The Twin Stim Plus Digital TENS/EMS devices are in compliance
with the EN 60601-1-2:2001 and EN 60601-1:1990+A1:1993+A2:
1995+A13:1996 safety standards.
Chapter 26 : WARRANTY
®
All Twin Stim Plus Digital TENS/EMS models carry a warranty of
one year from the date of delivery. The warranty applies to the
stimulator only and covers both parts and labour relating thereto.
The warranty does not apply to damage resulting from failure to
follow the operating instructions, accidents, abuse, alteration or
disassembly by unauthorized personnel.
®
Plus
STANDARDS
33