Adjusting The Controls - Tens Twin Stim Plus Instruction Manual

Chapter 20 : ADJUSTING THE CONTROLS
1. Panel Cover:
A lid covers the controls for selecting mode and adjusting settings.
Your medical professional may wish to set these controls for you
and request that you leave the cover in place.
2. Power On/Off Controls and Intensity Controls:
Power of the unit can be turned on by pressing the power control.
The intensity level can be increased or decreased by pressing the
intensity controls. Intensity level can be adjusted in 100 steps
linearly.
There are 4 leds on the top of unit showing the output of electrical
current. They will be light up when there is output.
3. Lead Connector
Connection of the electrodes is made with the four-lead connector
(lead wires). The device must be switched off before connecting
the cables. Electrodes must be pressed firmly on the skin.
PDF created with FinePrint pdfFactory trial version
22
http://www.pdffactory.com
4. Mode Control
There are 5 TENS modes(B, N, M, SD1, SD2) and 2 EMS modes
(S, A) available. The mode can be selected by pressing the "Mode"
control. When a TENS mode is selected, the LCD shows "TENS"
on the top. When EMS mode is selected, the LCD shows "EMS"
on the top.
5. Set Control
By pressing the "Set" control, you may enter the setting you
intend to make adjustment. You may start to set the value by
pressing the "Increment" and "Decrement" controls when the
value is flashing.
6. Increment Control
This button controls the increase of settings. When pressing this
button, the parameter will increase.
7. Decrement Control
This button controls the decrease of parameter. When pressing
this button, the parameter will decrease.
8. Timer
The unit has a timer of 1-60 minutes and Continuous. It can be
adjusted by pressing the "Set" and "Increment" or "Decrement"
controls. The treatment time will countdown automatically in one
minute increments. Its output will be shut off when time is up.
9. Low Battery Indicator
A low battery sign will show up on the liquid crystal display
when it needs to be replaced as soon as possible. The unit may
continue to operate for a few more hours depends on the
setting intensity level.
23