Tens Twin Stim Plus Instruction Manual page 14

10. Steps to Set a TENS Program
The settings can be adjusted according to the following steps.
a. Turn on the power
After the electrodes are placed firmly on skin and the lead
wires are plugged in the socket of device, turn the on/off
control clockwise. The menu will reveal on LCD. Notice the
indication of power and function on the LCD.
b. Select a Mode
Select a mode by pressing the "Mode" control. The mode you
selected will show up on the top of liquid crystal display. There
are 5 modes of your option including –B(Burst), M(Normal), M
(Modulation), SD1 and SD2. When a TENS mode is selected, it
shows "TENS" on the top of liquid crystal display.
After a mode is selected, always press "Set" to enter next
setting, and press "Increment or "Decrement" to adjust its value.
c. Set Pulse Width
Pulse Width is adjustable from 50 uS to 300 uS. Press "SET"
control to enter this menu, then press "Increment" or "Decrement"
to adjust the setting. If no instructions regarding the pulse width
are given in therapy, set the control to the suggested
70-120 uS setting.
PDF created with FinePrint pdfFactory trial version
24
http://www.pdffactory.com
d. Set Pulse Rate
Pulse rate is adjustable from 2Hz to 150 Hz . Press "SET"
control to enter this menu,then press "Increment" or "Decrement"
to adjust the setting. Unless otherwise instructed, turn the
pulse rate control to the 70-120 Hz range.
e. Set Timer
There are two adjustable timers available. The left timer
controlling the treatment time of CH1 and CH2.
The right timer controlling the treatment time of CH3 & CH4.
The treatment time is adjustable from 1 to 60 minutes or C
(Continuous). Press "SET" control to enter this menu, then
press "Increment" or "Decrement" to adjust the setting.
Press "Increment" control when the timer shows 60 minutes,
it will be switched to continuous stimulation. Two timers can
be set in the same way.
Left Timer Right Timer
11. Steps to Set a EMS Program
The settings can be adjusted according to the following steps.
f. Turn on the Power
After the electrodes are placed firmly on skin and the lead
wires are plugged in the socket of device, press the ON/OFF
25
Continuous