Appendix A
– Current Settings
A.2
Current Settings for Older Detectors
On CD20 and ED40 detectors in Dionex DX-500 instruments, the correct current is set by
navigating to the SRS field in the "Main" menu and using the "Select" keys to change the
setting. The readout is the approximate current level.
!
For optimal performance Dionex recommends the use of a Dionex RFC-10 or Dionex
RFC-30 power supply.
NOTE
Thermo Scientific
031956-11
Product Manual for the ERS 500 Suppressor
For Research Use Only. Not for Use in Diagnostic Procedures.
Page 79 of 84