Pppoe Settings; Figure 14 Pppoe Setup Screen - Nortel 2221 Product Manual

Chapter 3 System Configuration 37
Timeout – The number of seconds the access point waits for a reply from the
RADIUS server before it resends the request. (Range: 1-60; Default: 5)
Retransmit attempts – Number of times the access point will try to authenticate
logon access via the authentication server. (Range: 1-30; Default: 3)

PPPoE Settings

Figure 14 PPPoE Setup screen

Enter the PPPoE user name and password assigned by your Service Provider
(Figure 14). The Service Name is normally optional, but may be required by some
service providers.
Some xDSL Internet Service Providers may assign a fixed (static) IP address. If
you have been provided with this information, click on the "Static assigned" for
the "IP Allocation Mode," and enter the assigned "Local IP Address" and
"Remote IP addresses."
Using the Nortel Networks Wireless LAN Access Point 2220/2221