30
Chapter 3 System Configuration
802.11b: Set the operating radio channel number (Default: channel 11)
Figure 7 Channel screen
IP Configuration
DHCP Client: With DHCP (Dynamic Host Configuration Protocol) Client
enabled, the IP address, subnet mask, default gateway, and DNS address can be
dynamically assigned to the access point by an external network DHCP server on
the network. This device implements a DHCP client but not a DHCP server.
(Default: Enable)
If DHCP Client is not enabled, you must enter the IP address, subnet mask,
default gateway, and one or more DNS (Domain Name Servers) addresses
(Figure
214853-B
Note: Available channel settings are limited by local regulations which
determine which channels are available
8).
(Figure
7).