Attaching The Mounting Bracket To A Drop Ceiling; Attaching The Access Point 2220/2221 To The Mounting Bracket - Nortel 2221 Product Manual

68 Appendix C Mounting the Access Point 2220/2221 on a Drop Ceiling

Attaching the mounting bracket to a drop ceiling

To attach the mounting bracket to a drop ceiling:
1
2
3
4
Attaching the Access Point 2220/2221 to the mounting
bracket
To attach the Access Point 2220/2221 to the mounting bracket:
1
2
3
4
214853-B
Loosen the two washer nuts to allow the T-rail clamps to slide freely. Do not
remove the washer nuts.
Place the mounting bracket in the desired location and position the T-rail
clamps around the drop ceiling T-rail.
Holding the T-rail clamps in place around the T-rail, tighten both washer nuts
securely.
Verify that the mounting bracket is now securely attached to the drop ceiling
T-rail.
Attach the Access Point 2220 to the mounting bracket.
Align the slotted mounting holes on the Access Point 2220/2221 with the
mounting tabs on the bracket.
Press the Access Point 2220/2221 against the bracket, inserting the mounting
tabs into the slotted mounting holes.
Slide the Access Point 2220/2221 so that the mounting tabs move into the
narrow part of the slotted mounting holes. The spring clips will lock the
Access Point 2220/2221 in place when it is properly positioned.
Refer to See Chapter 1, "Hardware Installation," on page 19
on positioning the antennae and connecting the Ethernet cable and power
supply cable (if required) to the access point.
for instructions