Setup Wizard - Nortel 2221 Product Manual

26 Chapter 3 System Configuration
If DHCP is enabled, (default setting is "Enable," page 48) and a DHCP server is
located on the network, then the access point will automatically be assigned an IP
address when booted.
To access the Access Point 2220/2221's management interface, enter the IP
address of the device in your Web browser:
http://192.168.168.10
The Web management window will appear.

Setup Wizard

1
214853-B
Note: Both 802.11a and 802.11b radios are turned off on your Nortel
Networks Wireless LAN Access Point 2220/2221. You must configure
your Access Point 2220 for your country before turning on the 802.11a
and 802.11b radios.
For information on country-specific configuration, refer to
Country-specific Configuration for the Nortel Networks Wireless LAN
Access Point 2220/2221 (part number 215293-B). Go to
http://support.nortelnetworks.com/, select "Wireless LAN" and then
"WLAN Access Point 2220" or "WLAN Access Point 2221".
To access the management interface
and click "LOGIN."
Note: There is no password by default.
(Figure 3), enter the username "nortel"