Table of Contents
Advertisement
Chapter 3 System Configuration
41
Ethernet Type Filter
Use the "Ethernet Type Filter" table to filter out Ethernet packet frames matching
Ethernet protocol type. (Default: Disable)
SNMP
Figure 17 SNMP screen
Use this screen to display and enter a community string for the Simple Network
Management Protocol (SNMP). To communicate with the access point, the SNMP
agent must first be enabled, and the Network Management Station must submit a
valid community string for authentication
(Figure
17).
Location - Specifies the access point location
Contact - Set the system location string, that describes the system location.
(Maximum length: 255 characters)
Community Name (Read Only) - Specifies a community string with read-only
access. Authorized management stations are only able to retrieve MIB objects.
(Maximum length: 23 characters)
Using the Nortel Networks Wireless LAN Access Point 2220/2221
Advertisement
Table of Contents
