Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Follow the procedure from step 1 to step 6 in
2
Remove the battery.
Procedure
1
Open the latch and disconnect the I/O-board cable from system board.
2
Remove the screw (M2x3) that secures the I/O board to the base cover.
3
Push the securing tab to release the I/O board from the base cover.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
"Removing the base
Before
cover".
29