Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Follow the procedure from step 1 to step 6 in
2
Remove the battery.
3
Remove the
wireless
4
Remove the
display
5
Remove the
display
6
Remove the
display
Procedure
CAUTION: Place the display-panel assembly on a soft and clean surface to
avoid scratching the display.
1
Using a plastic scribe, gently pry the camera from the display back-cover and
antenna assembly.
84
computer. After working inside your computer, follow
After working inside your
card.
hinges.
bezel.
panel.
computer. For more safety best
www.dell.com/
"Removing the base
Before
cover".