JUKI APW-896N/IP-420 Instruction Manual page 68

* The sewin data below are inversed from the left to the right at the time of copying. (Other sewing
data are copied without inversion.)
No. Item
S003 Sewing mode changeover
S008 Flap concealed stitching data (Left sewing start)
S009 Flap concealed stitching data (Left sewing end)
S010 Flap concealed stitching data (Right sewing start)
S011 Flap concealed stitching data (Right sewing end)
S013 Changeover of deflection direction at the start of sewing
S015 Changeover of deflection direction at the end of sewing
S021 Setting of right width of corner knife at the start of sewing
S022 Setting of left width of corner knife at the start of sewing
S023 Setting of right width of corner knife at the end of sewing
S024 Setting of left width of corner knife at the end of sewing
S025 Setting of (left) corner knife motion position at the start of sewing
S026 Setting of (right) corner knife motion position at the start of sewing
S027 Setting of (left) corner knife motion position at the end of sewing
S028 Setting of (right) corner knife motion position at the end of sewing
④ Start copying.
When ENTER button
screen, the left and right sewing data are inversely copied. When
CANCEL button
sewing mode changeover screen without copying.
− 64 −
is pressed in the copy confirmation
is pressed, the screen returns to the original