Page 1
HDMI Matrix 4 x 2 With EDID Control User manual...
Page 2
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Introduction This is a high performance HDMI Matrix with four HDMI inputs & two outputs, it allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on the any of the two displays simultaneously, and supports 4K×2K, 3D, 12-bit Deep Color.
Page 3
Supports deep color up to 48-bit per pixel. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT). Supports the reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR Full colorimetry including sYCC601,Adobe RGB,Adobe YCC601,xvYCC extended gamut color Operates for TMDS clock frequencies up to 300MHz...
Page 4
Specifications Frequency Bandwidth 2.97Gbps Input Ports 4 x HDMI Female input ports Output Ports 2 x HDMI Female output ports Power Supply DC 5V 1A ESD Protection Human Body Model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Dimensions (mm) 85(W) X 192 (D) X 26 (H) Weight(g) Operating Temperature...
Page 5
Operation controls and Functions Front Panel ON/OFF: Power on/off switch. POWER LED: This red LED illuminate when the device is connected with power supply. IR IN: Remote control signal receive. OUTPUT A: Press this button to select input sources to HDMI OUT A,and the LED will indicate the corresponding input source.
Page 8
Rear Panel HDMI OUTPUT: These slots are where you connect the HDTV or monitor with HDMI cable. HDMI INPUT: These slots are where you connect the HDMI source output from DVD, PS3. DC IN: Plug the 5V DC power supply into the unit and connect the adaptor to AC wall outlet.
Page 10
Remote control OUTPUT A: Press IN1\IN2\IN3\IN4 button will fast switch to select input source to HDMI OUTPUT A, and the LED will indicate the corresponding input source. Press button OUTPUT A will cycle from input IN1\IN2\IN3\IN4. OUTPUT B: Press IN1\IN2\IN3\IN4 button will fast switch to select input source to HDMI OUTPUT B, and the LED will indicate the corresponding input source.
Need help?
Do you have a question about the 15376 and is the answer not in the manual?
Questions and answers